Paste method: glue, adhesive

Style: M stands for frosted, L stands for glossy,

Glue: 24 pieces of nails + box + glue

Jelly glue: 24 pieces of nails + boxed + glue + 24 jelly yellow glue

Note: The above are all manual plane measurements (excluding radians) dimensions, if there is any error within 1-3mm, please understand

Usage and precautions

3A662107B61BB1A37276D25355AF57FB[1].png

Step1: Wipe the nail surface with alcohol cotton

Step2: Compare and choose fake nails that suit your nail size

Step3: Apply the glue on the back of the fake nail, and apply it evenly

458D674843904A308C37BBDA343475CF[1].png D363390127EEA6E81C1ADF4185251EDE[1].png

Step 4: Stick it on your own nails, press hard for half a minute, there are numbers on the back of the nails, and the numbers are facing out.

Step 5: After sticking, you can trim the fake nails to make it more beautiful and comfortable

Step 6: Finish

Introduction to the use of different styles of nails:

1. Glue: the package contains two 2 grams of glue, which needs a degumming agent to be removed: the degumming agent needs to be purchased separately

2. Adhesive type (wearing armor): The nail piece has been coated with adhesive, which can be directly removed and removed at any time.

Adhesive properties:

1. Stickiness: glue > jelly glue.

2. Convenience: jelly glue > glue.

3. The glue is sticky and hurts the nails, and it is not easy to remove the nails. The nail pieces are only suitable for wearing once.

Jelly glue and wearing nails are slightly less sticky and cannot be soaked in water for a long time, and the nails can be used again after changing the glue.

How to remove the nail plate?

1. The glue model can wait for a long time and it will fall off on its own. Frequent immersion in hot water can also accelerate the falling off.

The quickest method is to remove it with a glue remover or nail remover: apply a few laps around the perimeter of the nail piece, let the liquid penetrate into the nail piece, wait for a while, and then gently peel it off.

2. The jelly glue can be removed after soaking in warm water for a while. You can also use a bakelite stick to insert it into the jelly glue, and then roll it up to remove it. You can re-apply the jelly glue to the nail piece next time.

3. It is easy to remove the adhesive back of the armor, just open it directly. The removal method of the adhesive back is completely the same as the jelly glue.

Wear The Same Type Of INS Shell Glitter Powder Spot Drill Nail Patch And Long Ballet Nail